Salt Bath 718 240V with Tap Solid State Drive
Brand

Evenheat

Controller

TAP

Relay

Solid State Quiet Drive

Volt

240

Model

Salt Bath 718

Salt Bath 718 240V with Tap Solid State Drive

SKU: SALTBATH-718-TAP-SS Categories: ,

$2,108.00

In stock

Salt Bath 718 240V with Tap Solid State Drive
Brand

Evenheat

Controller

TAP

Relay

Solid State Quiet Drive

Volt

240

Model

Salt Bath 718

The Salt Bath 718 features a chamber depth of 18″ and is designed to accommodate salt pots with minimum height of 22″ and diameters up to 5″. Special TAP control software utilizes two thermocouples to control proper heat-up and heat treat operations, as well as an over-temp thermocouple circuit for safety. A solid state relay was chosen for driving the heating elements to give tight control, longer heating element life and a low failure probability. The salt bath heat treat process involves immersing your blade into a bath of molten salts. Once immersed, the blade quickly reaches the proper hardening or quenching temperature. The blade is then allowed to soak in this bath for the amount of time you desire. Once the soak is completed the blade is pulled for further quenching and processing. The salt bath process provides an oxygen-free environment so there’s no need to wrap blades and temperature distribution around the blade is phenomenal. Additional features include drip shields on both the lid and control panel to stop any “drag-out” from reaching critical components, a pivoting control enclosure that allows for relaxed programming and safe storage as well as electrically grounded salt pot and thermocouples for electrical safety.

TAP

Evenheat salt bath kilns are built exclusively with the TAP control. The TAP utilizes a touchscreen that’s very easy to navigate and understand with all operations displayed in word form. The TAP control features a thermocouple switching function for reliable and safe salt bath use. When the heat treat process is started, the TAP uses the temperature of the firing chamber to control from. The chamber temperature is a steady and reliable point from which to control as the salts in the salt pot are solid at the beginning of the process. Once the salts in the salt bath become molten (liquid) the TAP is switched over (by the user) to the immersion thermocouple for precise salt bath temperature control. It’s a very useful and reliable feature that only the TAP control can offer. The TAP control features an Over-temp (high-limit) thermocouple circuit that aborts the heat treat process if the temperature exceeds the process temperature. This over-temp circuit adds a level of safety not found in other controls. Setting up the TAP for use is a very simple process that requires a single press of the Start key to get things rolling.While running, the TAP displays current temperature and thermocouple selection (chamber or immersion) in a large, easy to read format. It’s easily seen from across your shop or work area.

Evenheat salt bath kilns are standard equipped with solid state relays for high reliability. The TAP control has been specifically designed to operate these solid state relays.

Chamber Size

7″ Wide x 7″ Long x 18″ Deep – 0.51 Cubic Feet

(17.8cm Wide x 17.8cm Long x 45.7cm Deep – 14.4L

Outer Dimensions

18″ Wide x 13″ Long x 32″ Deep (includes the 8″ stand)

(45.7cm Wide x 33.0cm Long x 81.3cm Deep)

Maximum Temperature  2000°F (1093°C)

Electrical  240 Volts, 18 Amps, 4320 Watts, 60Hz, Single Phase Power Cord Plug Configuration – NEMA 6-20

Salt Pot Suggestions  Will accept salt pots up to 5.5″ OD. Thinner, schedule 40 316 Stainless Steel is preferred. ​Salt pot depth should be close to 22″. Salt pot must be grounded

Shipping Weight  110lb. (55Kg) – Approx.

There’s more to tell you about the Salt Bath 718 and why it’s best performing and safest salt pot kiln available. We encourage you to visit Evenheat’s website to get all the details.

FREE Shipping on all Evenheat Ovens within the Continental US

If you are located elsewhere, place your order as usual and we’ll contact you with a shipping quote before processing your order.

Important: Please allow 2-4 week lead-time, ovens are made-to-order and shipped directly from the factory.

WARNING: While the salt bath process offers advantages it does come with some hazards, notably the possibility of the molten salts erupting from the salt pot (vessel that contains the molten salt). This creates a burn and fire hazard as well as risk of personal injury or death. Before committing to salt bath heat treating be aware of these potential hazards. For detailed information on this and other risks and hazards of salt bath use please click on the Manuals link on this page.

0

Your Cart