Having trouble at checkout? Clear cookies/cache for this site only — this should be a one-time fix. Or try Incognito mode. Click here for instructions → Having trouble at checkout? Clear cookies/cache for this site only — this should be a one-time fix. Or try Incognito mode. Click here for instructions →

1 x 30 - 3M Diamond Micron Film Belt 675L

Buy in bulk and Save

  • 10 or more 5% off
  • 50 or more 10% off
Grit: 9 Micron

10 items left

Available in grit range from:

  • 9 Micron (2500) ** Light Blue **
  • 20 Micron (800)   ** Beige **
  • 30 Micron (500)   ** Green **
  • 45 Micron (320)   ** Grey **
  • 74 Micron (220)   ** Teal **
  • 125 Micron (120) ** Orange **

3M Diamond Microfinishing Film Belt 675L

Micron-graded diamond on a polyester film backing for close-tolerance finishes on hard metals and coatings. Use dry, or wet with water or oil-based lubricant. Best results when used wet.

  • Precision diamond mineral for consistent, close-tolerance finishes
  • Strong polyester film backing — runs dry or wet
  • Good for medium stock removal
  • Works well on contours and complex shapes
  • Color-coded by grade to help prevent mix-ups

3M 675L anchors micron-graded diamond to a water-resistant polyester film. The film backing lets you run the belt dry or with water or oil-based lubricant, which helps clear swarf, keep the cut cooler, and extend belt life.

This belt is commonly used on thermal spray coatings, ceramics, carbides, chilled iron, granite, and other hard or exotic materials. It is especially useful when you need a controlled finish on contoured or irregular parts.

When choosing grit, match the micron grade to the RA (roughness average) you need and the material you’re finishing. Using the wrong grade is the most common reason a microfinish comes out too coarse or takes to long to achieve desired finish.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Search